<?php //////////////////////////////////////////////////// // SMTP - PHP SMTP class // // Version 1.02 // // Define an SMTP class that can be used to connect // and communicate with any SMTP server. It implements // all the SMTP functions defined in RFC821 except TURN. // // Author: Chris Ryan // // License: LGPL, see LICENSE //////////////////////////////////////////////////// /** * SMTP is rfc 821 compliant and implements all the rfc 821 SMTP * commands except TURN which will always return a not implemented * error. SMTP also provides some utility methods for sending mail * to an SMTP server. * @package PHPMailer * @author Chris Ryan */ class SMTP { /** * SMTP server port * @var int */ var $SMTP_PORT = 25; /** * SMTP reply line ending * @var string */ var $CRLF = "\r\n"; /** * Sets whether debugging is turned on * @var bool */ var $do_debug; # the level of debug to perform /**#@+ * @access private */ var $smtp_conn; # the socket to the server var $error; # error if any on the last call var $helo_rply; # the reply the server sent to us for HELO /**#@-*/ /** * Initialize the class so that the data is in a known state. * @access public * @return void */ function SMTP() { $this->smtp_conn = 0; $this->error = null; $this->helo_rply = null; $this->do_debug = 0; } /************************************************************* * CONNECTION FUNCTIONS * ***********************************************************/ /** * Connect to the server specified on the port specified. * If the port is not specified use the default SMTP_PORT. * If tval is specified then a connection will try and be * established with the server for that number of seconds. * If tval is not specified the default is 30 seconds to * try on the connection. * * SMTP CODE SUCCESS: 220 * SMTP CODE FAILURE: 421 * @access public * @return bool */ function Connect($host,$port=0,$tval=120) { # set the error val to null so there is no confusion $this->error = null; # make sure we are __not__ connected if($this->connected()) { # ok we are connected! what should we do? # for now we will just give an error saying we # are already connected $this->error = array("error" => "Already connected to a server"); return false; } if(empty($port)) { $port = $this->SMTP_PORT; } #connect to the smtp server $this->smtp_conn = fsockopen($host, # the host of the server $port, # the port to use $errno, # error number if any $errstr, # error message if any $tval); # give up after ? secs # verify we connected properly if(empty($this->smtp_conn)) { $this->error = array("error" => "Failed to connect to server", "errno" => $errno, "errstr" => $errstr); if($this->do_debug >= 1) { echo "SMTP -> ERROR: " . $this->error["error"] . ": $errstr ($errno)" . $this->CRLF; } return false; } # sometimes the SMTP server takes a little longer to respond # so we will give it a longer timeout for the first read // Windows still does not have support for this timeout function if(substr(PHP_OS, 0, 3) != "WIN") socket_set_timeout($this->smtp_conn, $tval, 0); # get any announcement stuff $announce = $this->get_lines(); # set the timeout of any socket functions at 1/10 of a second //if(function_exists("socket_set_timeout")) // socket_set_timeout($this->smtp_conn, 0, 100000); if($this->do_debug >= 2) { echo "SMTP -> FROM SERVER:" . $this->CRLF . $announce; } return true; } /** * Performs SMTP authentication. Must be run after running the * Hello() method. Returns true if successfully authenticated. * @access public * @return bool */ function Authenticate($username, $password) { // Start authentication fputs($this->smtp_conn,"AUTH LOGIN" . $this->CRLF); $rply = $this->get_lines(); $code = substr($rply,0,3); if($code != 334) { $this->error = array("error" => "AUTH not accepted from server", "smtp_code" => $code, "smtp_msg" => substr($rply,4)); if($this->do_debug >= 1) { echo "SMTP -> ERROR: " . $this->error["error"] . ": " . $rply . $this->CRLF; } return false; } // Send encoded username fputs($this->smtp_conn, base64_encode($username) . $this->CRLF); $rply = $this->get_lines(); $code = substr($rply,0,3); if($code != 334) { $this->error = array("error" => "Username not accepted from server", "smtp_code" => $code, "smtp_msg" => substr($rply,4)); if($this->do_debug >= 1) { echo "SMTP -> ERROR: " . $this->error["error"] . ": " . $rply . $this->CRLF; } return false; } // Send encoded password fputs($this->smtp_conn, base64_encode($password) . $this->CRLF); $rply = $this->get_lines(); $code = substr($rply,0,3); if($code != 235) { $this->error = array("error" => "Password not accepted from server", "smtp_code" => $code, "smtp_msg" => substr($rply,4)); if($this->do_debug >= 1) { echo "SMTP -> ERROR: " . $this->error["error"] . ": " . $rply . $this->CRLF; } return false; } return true; } /** * Returns true if connected to a server otherwise false * @access private * @return bool */ function Connected() { if(!empty($this->smtp_conn)) { $sock_status = socket_get_status($this->smtp_conn); if($sock_status["eof"]) { # hmm this is an odd situation... the socket is # valid but we aren't connected anymore if($this->do_debug >= 1) { echo "SMTP -> NOTICE:" . $this->CRLF . "EOF caught while checking if connected"; } $this->Close(); return false; } return true; # everything looks good } return false; } /** * Closes the socket and cleans up the state of the class. * It is not considered good to use this function without * first trying to use QUIT. * @access public * @return void */ function Close() { $this->error = null; # so there is no confusion $this->helo_rply = null; if(!empty($this->smtp_conn)) { # close the connection and cleanup fclose($this->smtp_conn); $this->smtp_conn = 0; } } /*************************************************************** * SMTP COMMANDS * *************************************************************/ /** * Issues a data command and sends the msg_data to the server * finializing the mail transaction. $msg_data is the message * that is to be send with the headers. Each header needs to be * on a single line followed by a <CRLF> with the message headers * and the message body being seperated by and additional <CRLF>. * * Implements rfc 821: DATA <CRLF> * * SMTP CODE INTERMEDIATE: 354 * [data] * <CRLF>.<CRLF> * SMTP CODE SUCCESS: 250 * SMTP CODE FAILURE: 552,554,451,452 * SMTP CODE FAILURE: 451,554 * SMTP CODE ERROR : 500,501,503,421 * @access public * @return bool */ function Data($msg_data) { $this->error = null; # so no confusion is caused if(!$this->connected()) { $this->error = array( "error" => "Called Data() without being connected"); return false; } fputs($this->smtp_conn,"DATA" . $this->CRLF); $rply = $this->get_lines(); $code = substr($rply,0,3); if($this->do_debug >= 2) { echo "SMTP -> FROM SERVER:" . $this->CRLF . $rply; } if($code != 354) { $this->error = array("error" => "DATA command not accepted from server", "smtp_code" => $code, "smtp_msg" => substr($rply,4)); if($this->do_debug >= 1) { echo "SMTP -> ERROR: " . $this->error["error"] . ": " . $rply . $this->CRLF; } return false; } # the server is ready to accept data! # according to rfc 821 we should not send more than 1000 # including the CRLF # characters on a single line so we will break the data up # into lines by \r and/or \n then if needed we will break # each of those into smaller lines to fit within the limit. # in addition we will be looking for lines that start with # a period '.' and append and additional period '.' to that # line. NOTE: this does not count towards are limit. # normalize the line breaks so we know the explode works $msg_data = str_replace("\r\n","\n",$msg_data); $msg_data = str_replace("\r","\n",$msg_data); $lines = explode("\n",$msg_data); # we need to find a good way to determine is headers are # in the msg_data or if it is a straight msg body # currently I'm assuming rfc 822 definitions of msg headers # and if the first field of the first line (':' sperated) # does not contain a space then it _should_ be a header # and we can process all lines before a blank "" line as # headers. $field = substr($lines[0],0,strpos($lines[0],":")); $in_headers = false; if(!empty($field) && !strstr($field," ")) { $in_headers = true; } $max_line_length = 998; # used below; set here for ease in change while(list(,$line) = @each($lines)) { $lines_out = null; if($line == "" && $in_headers) { $in_headers = false; } # ok we need to break this line up into several # smaller lines while(strlen($line) > $max_line_length) { $pos = strrpos(substr($line,0,$max_line_length)," "); # Patch to fix DOS attack if(!$pos) { $pos = $max_line_length - 1; } $lines_out[] = substr($line,0,$pos); $line = substr($line,$pos + 1); # if we are processing headers we need to # add a LWSP-char to the front of the new line # rfc 822 on long msg headers if($in_headers) { $line = "\t" . $line; } } $lines_out[] = $line; # now send the lines to the server while(list(,$line_out) = @each($lines_out)) { if(strlen($line_out) > 0) { if(substr($line_out, 0, 1) == ".") { $line_out = "." . $line_out; } } fputs($this->smtp_conn,$line_out . $this->CRLF); } } # ok all the message data has been sent so lets get this # over with aleady fputs($this->smtp_conn, $this->CRLF . "." . $this->CRLF); $rply = $this->get_lines(); $code = substr($rply,0,3); if($this->do_debug >= 2) { echo "SMTP -> FROM SERVER:" . $this->CRLF . $rply; } if($code != 250) { $this->error = array("error" => "DATA not accepted from server", "smtp_code" => $code, "smtp_msg" => substr($rply,4)); if($this->do_debug >= 1) { echo "SMTP -> ERROR: " . $this->error["error"] . ": " . $rply . $this->CRLF; } return false; } return true; } /** * Expand takes the name and asks the server to list all the * people who are members of the _list_. Expand will return * back and array of the result or false if an error occurs. * Each value in the array returned has the format of: * [ <full-name> <sp> ] <path> * The definition of <path> is defined in rfc 821 * * Implements rfc 821: EXPN <SP> <string> <CRLF> * * SMTP CODE SUCCESS: 250 * SMTP CODE FAILURE: 550 * SMTP CODE ERROR : 500,501,502,504,421 * @access public * @return string array */ function Expand($name) { $this->error = null; # so no confusion is caused if(!$this->connected()) { $this->error = array( "error" => "Called Expand() without being connected"); return false; } fputs($this->smtp_conn,"EXPN " . $name . $this->CRLF); $rply = $this->get_lines(); $code = substr($rply,0,3); if($this->do_debug >= 2) { echo "SMTP -> FROM SERVER:" . $this->CRLF . $rply; } if($code != 250) { $this->error = array("error" => "EXPN not accepted from server", "smtp_code" => $code, "smtp_msg" => substr($rply,4)); if($this->do_debug >= 1) { echo "SMTP -> ERROR: " . $this->error["error"] . ": " . $rply . $this->CRLF; } return false; } # parse the reply and place in our array to return to user $entries = explode($this->CRLF,$rply); while(list(,$l) = @each($entries)) { $list[] = substr($l,4); } return $list; } /** * Sends the HELO command to the smtp server. * This makes sure that we and the server are in * the same known state. * * Implements from rfc 821: HELO <SP> <domain> <CRLF> * * SMTP CODE SUCCESS: 250 * SMTP CODE ERROR : 500, 501, 504, 421 * @access public * @return bool */ function Hello($host="") { $this->error = null; # so no confusion is caused if(!$this->connected()) { $this->error = array( "error" => "Called Hello() without being connected"); return false; } # if a hostname for the HELO wasn't specified determine # a suitable one to send if(empty($host)) { # we need to determine some sort of appopiate default # to send to the server $host = "localhost"; } // Send extended hello first (RFC 2821) if(!$this->SendHello("EHLO", $host)) { if(!$this->SendHello("HELO", $host)) return false; } return true; } /** * Sends a HELO/EHLO command. * @access private * @return bool */ function SendHello($hello, $host) { fputs($this->smtp_conn, $hello . " " . $host . $this->CRLF); $rply = $this->get_lines(); $code = substr($rply,0,3); if($this->do_debug >= 2) { echo "SMTP -> FROM SERVER: " . $this->CRLF . $rply; } if($code != 250) { $this->error = array("error" => $hello . " not accepted from server", "smtp_code" => $code, "smtp_msg" => substr($rply,4)); if($this->do_debug >= 1) { echo "SMTP -> ERROR: " . $this->error["error"] . ": " . $rply . $this->CRLF; } return false; } $this->helo_rply = $rply; return true; } /** * Gets help information on the keyword specified. If the keyword * is not specified then returns generic help, ussually contianing * A list of keywords that help is available on. This function * returns the results back to the user. It is up to the user to * handle the returned data. If an error occurs then false is * returned with $this->error set appropiately. * * Implements rfc 821: HELP [ <SP> <string> ] <CRLF> * * SMTP CODE SUCCESS: 211,214 * SMTP CODE ERROR : 500,501,502,504,421 * @access public * @return string */ function Help($keyword="") { $this->error = null; # to avoid confusion if(!$this->connected()) { $this->error = array( "error" => "Called Help() without being connected"); return false; } $extra = ""; if(!empty($keyword)) { $extra = " " . $keyword; } fputs($this->smtp_conn,"HELP" . $extra . $this->CRLF); $rply = $this->get_lines(); $code = substr($rply,0,3); if($this->do_debug >= 2) { echo "SMTP -> FROM SERVER:" . $this->CRLF . $rply; } if($code != 211 && $code != 214) { $this->error = array("error" => "HELP not accepted from server", "smtp_code" => $code, "smtp_msg" => substr($rply,4)); if($this->do_debug >= 1) { echo "SMTP -> ERROR: " . $this->error["error"] . ": " . $rply . $this->CRLF; } return false; } return $rply; } /** * Starts a mail transaction from the email address specified in * $from. Returns true if successful or false otherwise. If True * the mail transaction is started and then one or more Recipient * commands may be called followed by a Data command. * * Implements rfc 821: MAIL <SP> FROM:<reverse-path> <CRLF> * * SMTP CODE SUCCESS: 250 * SMTP CODE SUCCESS: 552,451,452 * SMTP CODE SUCCESS: 500,501,421 * @access public * @return bool */ function Mail($from) { $this->error = null; # so no confusion is caused if(!$this->connected()) { $this->error = array( "error" => "Called Mail() without being connected"); return false; } fputs($this->smtp_conn,"MAIL FROM:<" . $from . ">" . $this->CRLF); $rply = $this->get_lines(); $code = substr($rply,0,3); if($this->do_debug >= 2) { echo "SMTP -> FROM SERVER:" . $this->CRLF . $rply; } if($code != 250) { $this->error = array("error" => "MAIL not accepted from server", "smtp_code" => $code, "smtp_msg" => substr($rply,4)); if($this->do_debug >= 1) { echo "SMTP -> ERROR: " . $this->error["error"] . ": " . $rply . $this->CRLF; } return false; } return true; } /** * Sends the command NOOP to the SMTP server. * * Implements from rfc 821: NOOP <CRLF> * * SMTP CODE SUCCESS: 250 * SMTP CODE ERROR : 500, 421 * @access public * @return bool */ function Noop() { $this->error = null; # so no confusion is caused if(!$this->connected()) { $this->error = array( "error" => "Called Noop() without being connected"); return false; } fputs($this->smtp_conn,"NOOP" . $this->CRLF); $rply = $this->get_lines(); $code = substr($rply,0,3); if($this->do_debug >= 2) { echo "SMTP -> FROM SERVER:" . $this->CRLF . $rply; } if($code != 250) { $this->error = array("error" => "NOOP not accepted from server", "smtp_code" => $code, "smtp_msg" => substr($rply,4)); if($this->do_debug >= 1) { echo "SMTP -> ERROR: " . $this->error["error"] . ": " . $rply . $this->CRLF; } return false; } return true; } /** * Sends the quit command to the server and then closes the socket * if there is no error or the $close_on_error argument is true. * * Implements from rfc 821: QUIT <CRLF> * * SMTP CODE SUCCESS: 221 * SMTP CODE ERROR : 500 * @access public * @return bool */ function Quit($close_on_error=true) { $this->error = null; # so there is no confusion if(!$this->connected()) { $this->error = array( "error" => "Called Quit() without being connected"); return false; } # send the quit command to the server fputs($this->smtp_conn,"quit" . $this->CRLF); # get any good-bye messages $byemsg = $this->get_lines(); if($this->do_debug >= 2) { echo "SMTP -> FROM SERVER:" . $this->CRLF . $byemsg; } $rval = true; $e = null; $code = substr($byemsg,0,3); if($code != 221) { # use e as a tmp var cause Close will overwrite $this->error $e = array("error" => "SMTP server rejected quit command", "smtp_code" => $code, "smtp_rply" => substr($byemsg,4)); $rval = false; if($this->do_debug >= 1) { echo "SMTP -> ERROR: " . $e["error"] . ": " . $byemsg . $this->CRLF; } } if(empty($e) || $close_on_error) { $this->Close(); } return $rval; } /** * Sends the command RCPT to the SMTP server with the TO: argument of $to. * Returns true if the recipient was accepted false if it was rejected. * * Implements from rfc 821: RCPT <SP> TO:<forward-path> <CRLF> * * SMTP CODE SUCCESS: 250,251 * SMTP CODE FAILURE: 550,551,552,553,450,451,452 * SMTP CODE ERROR : 500,501,503,421 * @access public * @return bool */ function Recipient($to) { $this->error = null; # so no confusion is caused if(!$this->connected()) { $this->error = array( "error" => "Called Recipient() without being connected"); return false; } fputs($this->smtp_conn,"RCPT TO:<" . $to . ">" . $this->CRLF); $rply = $this->get_lines(); $code = substr($rply,0,3); if($this->do_debug >= 2) { echo "SMTP -> FROM SERVER:" . $this->CRLF . $rply; } if($code != 250 && $code != 251) { $this->error = array("error" => "RCPT not accepted from server", "smtp_code" => $code, "smtp_msg" => substr($rply,4)); if($this->do_debug >= 1) { echo "SMTP -> ERROR: " . $this->error["error"] . ": " . $rply . $this->CRLF; } return false; } return true; } /** * Sends the RSET command to abort and transaction that is * currently in progress. Returns true if successful false * otherwise. * * Implements rfc 821: RSET <CRLF> * * SMTP CODE SUCCESS: 250 * SMTP CODE ERROR : 500,501,504,421 * @access public * @return bool */ function Reset() { $this->error = null; # so no confusion is caused if(!$this->connected()) { $this->error = array( "error" => "Called Reset() without being connected"); return false; } fputs($this->smtp_conn,"RSET" . $this->CRLF); $rply = $this->get_lines(); $code = substr($rply,0,3); if($this->do_debug >= 2) { echo "SMTP -> FROM SERVER:" . $this->CRLF . $rply; } if($code != 250) { $this->error = array("error" => "RSET failed", "smtp_code" => $code, "smtp_msg" => substr($rply,4)); if($this->do_debug >= 1) { echo "SMTP -> ERROR: " . $this->error["error"] . ": " . $rply . $this->CRLF; } return false; } return true; } /** * Starts a mail transaction from the email address specified in * $from. Returns true if successful or false otherwise. If True * the mail transaction is started and then one or more Recipient * commands may be called followed by a Data command. This command * will send the message to the users terminal if they are logged * in. * * Implements rfc 821: SEND <SP> FROM:<reverse-path> <CRLF> * * SMTP CODE SUCCESS: 250 * SMTP CODE SUCCESS: 552,451,452 * SMTP CODE SUCCESS: 500,501,502,421 * @access public * @return bool */ function Send($from) { $this->error = null; # so no confusion is caused if(!$this->connected()) { $this->error = array( "error" => "Called Send() without being connected"); return false; } fputs($this->smtp_conn,"SEND FROM:" . $from . $this->CRLF); $rply = $this->get_lines(); $code = substr($rply,0,3); if($this->do_debug >= 2) { echo "SMTP -> FROM SERVER:" . $this->CRLF . $rply; } if($code != 250) { $this->error = array("error" => "SEND not accepted from server", "smtp_code" => $code, "smtp_msg" => substr($rply,4)); if($this->do_debug >= 1) { echo "SMTP -> ERROR: " . $this->error["error"] . ": " . $rply . $this->CRLF; } return false; } return true; } /** * Starts a mail transaction from the email address specified in * $from. Returns true if successful or false otherwise. If True * the mail transaction is started and then one or more Recipient * commands may be called followed by a Data command. This command * will send the message to the users terminal if they are logged * in and send them an email. * * Implements rfc 821: SAML <SP> FROM:<reverse-path> <CRLF> * * SMTP CODE SUCCESS: 250 * SMTP CODE SUCCESS: 552,451,452 * SMTP CODE SUCCESS: 500,501,502,421 * @access public * @return bool */ function SendAndMail($from) { $this->error = null; # so no confusion is caused if(!$this->connected()) { $this->error = array( "error" => "Called SendAndMail() without being connected"); return false; } fputs($this->smtp_conn,"SAML FROM:" . $from . $this->CRLF); $rply = $this->get_lines(); $code = substr($rply,0,3); if($this->do_debug >= 2) { echo "SMTP -> FROM SERVER:" . $this->CRLF . $rply; } if($code != 250) { $this->error = array("error" => "SAML not accepted from server", "smtp_code" => $code, "smtp_msg" => substr($rply,4)); if($this->do_debug >= 1) { echo "SMTP -> ERROR: " . $this->error["error"] . ": " . $rply . $this->CRLF; } return false; } return true; } /** * Starts a mail transaction from the email address specified in * $from. Returns true if successful or false otherwise. If True * the mail transaction is started and then one or more Recipient * commands may be called followed by a Data command. This command * will send the message to the users terminal if they are logged * in or mail it to them if they are not. * * Implements rfc 821: SOML <SP> FROM:<reverse-path> <CRLF> * * SMTP CODE SUCCESS: 250 * SMTP CODE SUCCESS: 552,451,452 * SMTP CODE SUCCESS: 500,501,502,421 * @access public * @return bool */ function SendOrMail($from) { $this->error = null; # so no confusion is caused if(!$this->connected()) { $this->error = array( "error" => "Called SendOrMail() without being connected"); return false; } fputs($this->smtp_conn,"SOML FROM:" . $from . $this->CRLF); $rply = $this->get_lines(); $code = substr($rply,0,3); if($this->do_debug >= 2) { echo "SMTP -> FROM SERVER:" . $this->CRLF . $rply; } if($code != 250) { $this->error = array("error" => "SOML not accepted from server", "smtp_code" => $code, "smtp_msg" => substr($rply,4)); if($this->do_debug >= 1) { echo "SMTP -> ERROR: " . $this->error["error"] . ": " . $rply . $this->CRLF; } return false; } return true; } /** * This is an optional command for SMTP that this class does not * support. This method is here to make the RFC821 Definition * complete for this class and __may__ be implimented in the future * * Implements from rfc 821: TURN <CRLF> * * SMTP CODE SUCCESS: 250 * SMTP CODE FAILURE: 502 * SMTP CODE ERROR : 500, 503 * @access public * @return bool */ function Turn() { $this->error = array("error" => "This method, TURN, of the SMTP ". "is not implemented"); if($this->do_debug >= 1) { echo "SMTP -> NOTICE: " . $this->error["error"] . $this->CRLF; } return false; } /** * Verifies that the name is recognized by the server. * Returns false if the name could not be verified otherwise * the response from the server is returned. * * Implements rfc 821: VRFY <SP> <string> <CRLF> * * SMTP CODE SUCCESS: 250,251 * SMTP CODE FAILURE: 550,551,553 * SMTP CODE ERROR : 500,501,502,421 * @access public * @return int */ function Verify($name) { $this->error = null; # so no confusion is caused if(!$this->connected()) { $this->error = array( "error" => "Called Verify() without being connected"); return false; } fputs($this->smtp_conn,"VRFY " . $name . $this->CRLF); $rply = $this->get_lines(); $code = substr($rply,0,3); if($this->do_debug >= 2) { echo "SMTP -> FROM SERVER:" . $this->CRLF . $rply; } if($code != 250 && $code != 251) { $this->error = array("error" => "VRFY failed on name '$name'", "smtp_code" => $code, "smtp_msg" => substr($rply,4)); if($this->do_debug >= 1) { echo "SMTP -> ERROR: " . $this->error["error"] . ": " . $rply . $this->CRLF; } return false; } return $rply; } /******************************************************************* * INTERNAL FUNCTIONS * ******************************************************************/ /** * Read in as many lines as possible * either before eof or socket timeout occurs on the operation. * With SMTP we can tell if we have more lines to read if the * 4th character is '-' symbol. If it is a space then we don't * need to read anything else. * @access private * @return string */ function get_lines() { $data = ""; while($str = fgets($this->smtp_conn,515)) { if($this->do_debug >= 4) { echo "SMTP -> get_lines(): \$data was \"$data\"" . $this->CRLF; echo "SMTP -> get_lines(): \$str is \"$str\"" . $this->CRLF; } $data .= $str; if($this->do_debug >= 4) { echo "SMTP -> get_lines(): \$data is \"$data\"" . $this->CRLF; } # if the 4th character is a space then we are done reading # so just break the loop if(substr($str,3,1) == " ") { break; } } return $data; } } ?> <?php //////////////////////////////////////////////////// // PHPMailer - PHP email class // // Class for sending email using either // sendmail, PHP mail(), or SMTP. Methods are // based upon the standard AspEmail(tm) classes. // // Copyright (C) 2001 - 2003 Brent R. Matzelle // // License: LGPL, see LICENSE //////////////////////////////////////////////////// /** * PHPMailer - PHP email transport class * @package PHPMailer * @author Brent R. Matzelle * @copyright 2001 - 2003 Brent R. Matzelle */ class PHPMailer { ///////////////////////////////////////////////// // PUBLIC VARIABLES ///////////////////////////////////////////////// /** * Email priority (1 = High, 3 = Normal, 5 = low). * @var int */ var $Priority = 3; /** * Sets the CharSet of the message. * @var string */ var $CharSet = "iso-8859-1"; /** * Sets the Content-type of the message. * @var string */ var $ContentType = "text/plain"; /** * Sets the Encoding of the message. Options for this are "8bit", * "7bit", "binary", "base64", and "quoted-printable". * @var string */ var $Encoding = "8bit"; /** * Holds the most recent mailer error message. * @var string */ var $ErrorInfo = ""; /** * Sets the From email address for the message. * @var string */ var $From = "root@localhost"; /** * Sets the From name of the message. * @var string */ var $FromName = "Root User"; /** * Sets the Sender email (Return-Path) of the message. If not empty, * will be sent via -f to sendmail or as 'MAIL FROM' in smtp mode. * @var string */ var $Sender = ""; /** * Sets the Subject of the message. * @var string */ var $Subject = ""; /** * Sets the Body of the message. This can be either an HTML or text body. * If HTML then run IsHTML(true). * @var string */ var $Body = ""; /** * Sets the text-only body of the message. This automatically sets the * email to multipart/alternative. This body can be read by mail * clients that do not have HTML email capability such as mutt. Clients * that can read HTML will view the normal Body. * @var string */ var $AltBody = ""; /** * Sets word wrapping on the body of the message to a given number of * characters. * @var int */ var $WordWrap = 0; /** * Method to send mail: ("mail", "sendmail", or "smtp"). * @var string */ var $Mailer = "mail"; /** * Sets the path of the sendmail program. * @var string */ var $Sendmail = "/usr/sbin/sendmail"; /** * Path to PHPMailer plugins. This is now only useful if the SMTP class * is in a different directory than the PHP include path. * @var string */ var $PluginDir = ""; /** * Holds PHPMailer version. * @var string */ var $Version = "1.73"; /** * Sets the email address that a reading confirmation will be sent. * @var string */ var $ConfirmReadingTo = ""; /** * Sets the hostname to use in Message-Id and Received headers * and as default HELO string. If empty, the value returned * by SERVER_NAME is used or 'localhost.localdomain'. * @var string */ var $Hostname = ""; ///////////////////////////////////////////////// // SMTP VARIABLES ///////////////////////////////////////////////// /** * Sets the SMTP hosts. All hosts must be separated by a * semicolon. You can also specify a different port * for each host by using this format: [hostname:port] * (e.g. "smtp1.example.com:25;smtp2.example.com"). * Hosts will be tried in order. * @var string */ var $Host = "localhost"; /** * Sets the default SMTP server port. * @var int */ var $Port = 25; /** * Sets the SMTP HELO of the message (Default is $Hostname). * @var string */ var $Helo = ""; /** * Sets SMTP authentication. Utilizes the Username and Password variables. * @var bool */ var $SMTPAuth = false; /** * Sets SMTP username. * @var string */ var $Username = ""; /** * Sets SMTP password. * @var string */ var $Password = ""; /** * Sets the SMTP server timeout in seconds. This function will not * work with the win32 version. * @var int */ var $Timeout = 10; /** * Sets SMTP class debugging on or off. * @var bool */ var $SMTPDebug = false; /** * Prevents the SMTP connection from being closed after each mail * sending. If this is set to true then to close the connection * requires an explicit call to SmtpClose(). * @var bool */ var $SMTPKeepAlive = false; /**#@+ * @access private */ var $smtp = NULL; var $to = array(); var $cc = array(); var $bcc = array(); var $ReplyTo = array(); var $attachment = array(); var $CustomHeader = array(); var $message_type = ""; var $boundary = array(); var $language = array(); var $error_count = 0; var $LE = "\n"; /**#@-*/ ///////////////////////////////////////////////// // VARIABLE METHODS ///////////////////////////////////////////////// /** * Sets message type to HTML. * @param bool $bool * @return void */ function IsHTML($bool) { if($bool == true) $this->ContentType = "text/html"; else $this->ContentType = "text/plain"; } /** * Sets Mailer to send message using SMTP. * @return void */ function IsSMTP() { $this->Mailer = "smtp"; } /** * Sets Mailer to send message using PHP mail() function. * @return void */ function IsMail() { $this->Mailer = "mail"; } /** * Sets Mailer to send message using the $Sendmail program. * @return void */ function IsSendmail() { $this->Mailer = "sendmail"; } /** * Sets Mailer to send message using the qmail MTA. * @return void */ function IsQmail() { $this->Sendmail = "/var/qmail/bin/sendmail"; $this->Mailer = "sendmail"; } ///////////////////////////////////////////////// // RECIPIENT METHODS ///////////////////////////////////////////////// /** * Adds a "To" address. * @param string $address * @param string $name * @return void */ function AddAddress($address, $name = "") { $cur = count($this->to); $this->to[$cur][0] = trim($address); $this->to[$cur][1] = $name; } /** * Adds a "Cc" address. Note: this function works * with the SMTP mailer on win32, not with the "mail" * mailer. * @param string $address * @param string $name * @return void */ function AddCC($address, $name = "") { $cur = count($this->cc); $this->cc[$cur][0] = trim($address); $this->cc[$cur][1] = $name; } /** * Adds a "Bcc" address. Note: this function works * with the SMTP mailer on win32, not with the "mail" * mailer. * @param string $address * @param string $name * @return void */ function AddBCC($address, $name = "") { $cur = count($this->bcc); $this->bcc[$cur][0] = trim($address); $this->bcc[$cur][1] = $name; } /** * Adds a "Reply-to" address. * @param string $address * @param string $name * @return void */ function AddReplyTo($address, $name = "") { $cur = count($this->ReplyTo); $this->ReplyTo[$cur][0] = trim($address); $this->ReplyTo[$cur][1] = $name; } ///////////////////////////////////////////////// // MAIL SENDING METHODS ///////////////////////////////////////////////// /** * Creates message and assigns Mailer. If the message is * not sent successfully then it returns false. Use the ErrorInfo * variable to view description of the error. * @return bool */ function Send() { $header = ""; $body = ""; $result = true; if((count($this->to) + count($this->cc) + count($this->bcc)) < 1) { $this->SetError($this->Lang("provide_address")); return false; } // Set whether the message is multipart/alternative if(!empty($this->AltBody)) $this->ContentType = "multipart/alternative"; $this->error_count = 0; // reset errors $this->SetMessageType(); $header .= $this->CreateHeader(); $body = $this->CreateBody(); if($body == "") { return false; } // Choose the mailer switch($this->Mailer) { case "sendmail": $result = $this->SendmailSend($header, $body); break; case "mail": $result = $this->MailSend($header, $body); break; case "smtp": $result = $this->SmtpSend($header, $body); break; default: $this->SetError($this->Mailer . $this->Lang("mailer_not_supported")); $result = false; break; } return $result; } /** * Sends mail using the $Sendmail program. * @access private * @return bool */ function SendmailSend($header, $body) { if ($this->Sender != "") $sendmail = sprintf("%s -oi -f %s -t", $this->Sendmail, $this->Sender); else $sendmail = sprintf("%s -oi -t", $this->Sendmail); if(!@$mail = popen($sendmail, "w")) { $this->SetError($this->Lang("execute") . $this->Sendmail); return false; } fputs($mail, $header); fputs($mail, $body); $result = pclose($mail) >> 8 & 0xFF; if($result != 0) { $this->SetError($this->Lang("execute") . $this->Sendmail); return false; } return true; } /** * Sends mail using the PHP mail() function. * @access private * @return bool */ function MailSend($header, $body) { $to = ""; for($i = 0; $i < count($this->to); $i++) { if($i != 0) { $to .= ", "; } $to .= $this->to[$i][0]; } if ($this->Sender != "" && strlen(ini_get("safe_mode"))< 1) { $old_from = ini_get("sendmail_from"); ini_set("sendmail_from", $this->Sender); $params = sprintf("-oi -f %s", $this->Sender); $rt = @mail($to, $this->EncodeHeader($this->Subject), $body, $header, $params); } else $rt = @mail($to, $this->EncodeHeader($this->Subject), $body, $header); if (isset($old_from)) ini_set("sendmail_from", $old_from); if(!$rt) { $this->SetError($this->Lang("instantiate")); return false; } return true; } /** * Sends mail via SMTP using PhpSMTP (Author: * Chris Ryan). Returns bool. Returns false if there is a * bad MAIL FROM, RCPT, or DATA input. * @access private * @return bool */ function SmtpSend($header, $body) { // include_once($this->PluginDir . "class.smtp.php"); $error = ""; $bad_rcpt = array(); if(!$this->SmtpConnect()) return false; $smtp_from = ($this->Sender == "") ? $this->From : $this->Sender; if(!$this->smtp->Mail($smtp_from)) { $error = $this->Lang("from_failed") . $smtp_from; $this->SetError($error); $this->smtp->Reset(); return false; } // Attempt to send attach all recipients for($i = 0; $i < count($this->to); $i++) { if(!$this->smtp->Recipient($this->to[$i][0])) $bad_rcpt[] = $this->to[$i][0]; } for($i = 0; $i < count($this->cc); $i++) { if(!$this->smtp->Recipient($this->cc[$i][0])) $bad_rcpt[] = $this->cc[$i][0]; } for($i = 0; $i < count($this->bcc); $i++) { if(!$this->smtp->Recipient($this->bcc[$i][0])) $bad_rcpt[] = $this->bcc[$i][0]; } if(count($bad_rcpt) > 0) // Create error message { for($i = 0; $i < count($bad_rcpt); $i++) { if($i != 0) { $error .= ", "; } $error .= $bad_rcpt[$i]; } $error = $this->Lang("recipients_failed") . $error; $this->SetError($error); $this->smtp->Reset(); return false; } if(!$this->smtp->Data($header . $body)) { $this->SetError($this->Lang("data_not_accepted")); $this->smtp->Reset(); return false; } if($this->SMTPKeepAlive == true) $this->smtp->Reset(); else $this->SmtpClose(); return true; } /** * Initiates a connection to an SMTP server. Returns false if the * operation failed. * @access private * @return bool */ function SmtpConnect() { if($this->smtp == NULL) { $this->smtp = new SMTP(); } $this->smtp->do_debug = $this->SMTPDebug; $hosts = explode(";", $this->Host); $index = 0; $connection = ($this->smtp->Connected()); // Retry while there is no connection while($index < count($hosts) && $connection == false) { if(strstr($hosts[$index], ":")) list($host, $port) = explode(":", $hosts[$index]); else { $host = $hosts[$index]; $port = $this->Port; } if($this->smtp->Connect($host, $port, $this->Timeout)) { if ($this->Helo != '') $this->smtp->Hello($this->Helo); else $this->smtp->Hello($this->ServerHostname()); if($this->SMTPAuth) { if(!$this->smtp->Authenticate($this->Username, $this->Password)) { $this->SetError($this->Lang("authenticate")); $this->smtp->Reset(); $connection = false; } } $connection = true; } $index++; } if(!$connection) $this->SetError($this->Lang("connect_host")); return $connection; } /** * Closes the active SMTP session if one exists. * @return void */ function SmtpClose() { if($this->smtp != NULL) { if($this->smtp->Connected()) { $this->smtp->Quit(); $this->smtp->Close(); } } } /** * Sets the language for all class error messages. Returns false * if it cannot load the language file. The default language type * is English. * @param string $lang_type Type of language (e.g. Portuguese: "br") * @param string $lang_path Path to the language file directory * @access public * @return bool */ function SetLanguage($lang_type, $lang_path = "language/") { if(file_exists($lang_path.'phpmailer.lang-'.$lang_type.'.php')) include($lang_path.'phpmailer.lang-'.$lang_type.'.php'); else if(file_exists($lang_path.'phpmailer.lang-en.php')) include($lang_path.'phpmailer.lang-en.php'); else { $this->SetError("Could not load language file"); return false; } $this->language = $PHPMAILER_LANG; return true; } ///////////////////////////////////////////////// // MESSAGE CREATION METHODS ///////////////////////////////////////////////// /** * Creates recipient headers. * @access private * @return string */ function AddrAppend($type, $addr) { $addr_str = $type . ": "; $addr_str .= $this->AddrFormat($addr[0]); if(count($addr) > 1) { for($i = 1; $i < count($addr); $i++) $addr_str .= ", " . $this->AddrFormat($addr[$i]); } $addr_str .= $this->LE; return $addr_str; } /** * Formats an address correctly. * @access private * @return string */ function AddrFormat($addr) { if(empty($addr[1])) $formatted = $addr[0]; else { $formatted = $this->EncodeHeader($addr[1], 'phrase') . " <" . $addr[0] . ">"; } return $formatted; } /** * Wraps message for use with mailers that do not * automatically perform wrapping and for quoted-printable. * Original written by philippe. * @access private * @return string */ function WrapText($message, $length, $qp_mode = false) { $soft_break = ($qp_mode) ? sprintf(" =%s", $this->LE) : $this->LE; $message = $this->FixEOL($message); if (substr($message, -1) == $this->LE) $message = substr($message, 0, -1); $line = explode($this->LE, $message); $message = ""; for ($i=0 ;$i < count($line); $i++) { $line_part = explode(" ", $line[$i]); $buf = ""; for ($e = 0; $e<count($line_part); $e++) { $word = $line_part[$e]; if ($qp_mode and (strlen($word) > $length)) { $space_left = $length - strlen($buf) - 1; if ($e != 0) { if ($space_left > 20) { $len = $space_left; if (substr($word, $len - 1, 1) == "=") $len--; elseif (substr($word, $len - 2, 1) == "=") $len -= 2; $part = substr($word, 0, $len); $word = substr($word, $len); $buf .= " " . $part; $message .= $buf . sprintf("=%s", $this->LE); } else { $message .= $buf . $soft_break; } $buf = ""; } while (strlen($word) > 0) { $len = $length; if (substr($word, $len - 1, 1) == "=") $len--; elseif (substr($word, $len - 2, 1) == "=") $len -= 2; $part = substr($word, 0, $len); $word = substr($word, $len); if (strlen($word) > 0) $message .= $part . sprintf("=%s", $this->LE); else $buf = $part; } } else { $buf_o = $buf; $buf .= ($e == 0) ? $word : (" " . $word); if (strlen($buf) > $length and $buf_o != "") { $message .= $buf_o . $soft_break; $buf = $word; } } } $message .= $buf . $this->LE; } return $message; } /** * Set the body wrapping. * @access private * @return void */ function SetWordWrap() { if($this->WordWrap < 1) return; switch($this->message_type) { case "alt": // fall through case "alt_attachments": $this->AltBody = $this->WrapText($this->AltBody, $this->WordWrap); break; default: $this->Body = $this->WrapText($this->Body, $this->WordWrap); break; } } /** * Assembles message header. * @access private * @return string */ function CreateHeader() { $result = ""; // Set the boundaries $uniq_id = md5(uniqid(time())); $this->boundary[1] = "b1_" . $uniq_id; $this->boundary[2] = "b2_" . $uniq_id; $result .= $this->HeaderLine("Date", $this->RFCDate()); if($this->Sender == "") $result .= $this->HeaderLine("Return-Path", trim($this->From)); else $result .= $this->HeaderLine("Return-Path", trim($this->Sender)); // To be created automatically by mail() if($this->Mailer != "mail") { if(count($this->to) > 0) $result .= $this->AddrAppend("To", $this->to); else if (count($this->cc) == 0) $result .= $this->HeaderLine("To", "undisclosed-recipients:;"); if(count($this->cc) > 0) $result .= $this->AddrAppend("Cc", $this->cc); } $from = array(); $from[0][0] = trim($this->From); $from[0][1] = $this->FromName; $result .= $this->AddrAppend("From", $from); // sendmail and mail() extract Bcc from the header before sending if((($this->Mailer == "sendmail") || ($this->Mailer == "mail")) && (count($this->bcc) > 0)) $result .= $this->AddrAppend("Bcc", $this->bcc); if(count($this->ReplyTo) > 0) $result .= $this->AddrAppend("Reply-to", $this->ReplyTo); // mail() sets the subject itself if($this->Mailer != "mail") $result .= $this->HeaderLine("Subject", $this->EncodeHeader(trim($this->Subject))); $result .= sprintf("Message-ID: <%s@%s>%s", $uniq_id, $this->ServerHostname(), $this->LE); $result .= $this->HeaderLine("X-Priority", $this->Priority); $result .= $this->HeaderLine("X-Mailer", "PHPMailer [version " . $this->Version . "]"); if($this->ConfirmReadingTo != "") { $result .= $this->HeaderLine("Disposition-Notification-To", "<" . trim($this->ConfirmReadingTo) . ">"); } // Add custom headers for($index = 0; $index < count($this->CustomHeader); $index++) { $result .= $this->HeaderLine(trim($this->CustomHeader[$index][0]), $this->EncodeHeader(trim($this->CustomHeader[$index][1]))); } $result .= $this->HeaderLine("MIME-Version", "1.0"); switch($this->message_type) { case "plain": $result .= $this->HeaderLine("Content-Transfer-Encoding", $this->Encoding); $result .= sprintf("Content-Type: %s; charset=\"%s\"", $this->ContentType, $this->CharSet); break; case "attachments": // fall through case "alt_attachments": if($this->InlineImageExists()) { $result .= sprintf("Content-Type: %s;%s\ttype=\"text/html\";%s\tboundary=\"%s\"%s", "multipart/related", $this->LE, $this->LE, $this->boundary[1], $this->LE); } else { $result .= $this->HeaderLine("Content-Type", "multipart/mixed;"); $result .= $this->TextLine("\tboundary=\"" . $this->boundary[1] . '"'); } break; case "alt": $result .= $this->HeaderLine("Content-Type", "multipart/alternative;"); $result .= $this->TextLine("\tboundary=\"" . $this->boundary[1] . '"'); break; } if($this->Mailer != "mail") $result .= $this->LE.$this->LE; return $result; } /** * Assembles the message body. Returns an empty string on failure. * @access private * @return string */ function CreateBody() { $result = ""; $this->SetWordWrap(); switch($this->message_type) { case "alt": $result .= $this->GetBoundary($this->boundary[1], "", "text/plain", ""); $result .= $this->EncodeString($this->AltBody, $this->Encoding); $result .= $this->LE.$this->LE; $result .= $this->GetBoundary($this->boundary[1], "", "text/html", ""); $result .= $this->EncodeString($this->Body, $this->Encoding); $result .= $this->LE.$this->LE; $result .= $this->EndBoundary($this->boundary[1]); break; case "plain": $result .= $this->EncodeString($this->Body, $this->Encoding); break; case "attachments": $result .= $this->GetBoundary($this->boundary[1], "", "", ""); $result .= $this->EncodeString($this->Body, $this->Encoding); $result .= $this->LE; $result .= $this->AttachAll(); break; case "alt_attachments": $result .= sprintf("--%s%s", $this->boundary[1], $this->LE); $result .= sprintf("Content-Type: %s;%s" . "\tboundary=\"%s\"%s", "multipart/alternative", $this->LE, $this->boundary[2], $this->LE.$this->LE); // Create text body $result .= $this->GetBoundary($this->boundary[2], "", "text/plain", "") . $this->LE; $result .= $this->EncodeString($this->AltBody, $this->Encoding); $result .= $this->LE.$this->LE; // Create the HTML body $result .= $this->GetBoundary($this->boundary[2], "", "text/html", "") . $this->LE; $result .= $this->EncodeString($this->Body, $this->Encoding); $result .= $this->LE.$this->LE; $result .= $this->EndBoundary($this->boundary[2]); $result .= $this->AttachAll(); break; } if($this->IsError()) $result = ""; return $result; } /** * Returns the start of a message boundary. * @access private */ function GetBoundary($boundary, $charSet, $contentType, $encoding) { $result = ""; if($charSet == "") { $charSet = $this->CharSet; } if($contentType == "") { $contentType = $this->ContentType; } if($encoding == "") { $encoding = $this->Encoding; } $result .= $this->TextLine("--" . $boundary); $result .= sprintf("Content-Type: %s; charset = \"%s\"", $contentType, $charSet); $result .= $this->LE; $result .= $this->HeaderLine("Content-Transfer-Encoding", $encoding); $result .= $this->LE; return $result; } /** * Returns the end of a message boundary. * @access private */ function EndBoundary($boundary) { return $this->LE . "--" . $boundary . "--" . $this->LE; } /** * Sets the message type. * @access private * @return void */ function SetMessageType() { if(count($this->attachment) < 1 && strlen($this->AltBody) < 1) $this->message_type = "plain"; else { if(count($this->attachment) > 0) $this->message_type = "attachments"; if(strlen($this->AltBody) > 0 && count($this->attachment) < 1) $this->message_type = "alt"; if(strlen($this->AltBody) > 0 && count($this->attachment) > 0) $this->message_type = "alt_attachments"; } } /** * Returns a formatted header line. * @access private * @return string */ function HeaderLine($name, $value) { return $name . ": " . $value . $this->LE; } /** * Returns a formatted mail line. * @access private * @return string */ function TextLine($value) { return $value . $this->LE; } ///////////////////////////////////////////////// // ATTACHMENT METHODS ///////////////////////////////////////////////// /** * Adds an attachment from a path on the filesystem. * Returns false if the file could not be found * or accessed. * @param string $path Path to the attachment. * @param string $name Overrides the attachment name. * @param string $encoding File encoding (see $Encoding). * @param string $type File extension (MIME) type. * @return bool */ function AddAttachment($path, $name = "", $encoding = "base64", $type = "application/octet-stream") { if(!@is_file($path)) { $this->SetError($this->Lang("file_access") . $path); return false; } $filename = basename($path); if($name == "") $name = $filename; $cur = count($this->attachment); $this->attachment[$cur][0] = $path; $this->attachment[$cur][1] = $filename; $this->attachment[$cur][2] = $name; $this->attachment[$cur][3] = $encoding; $this->attachment[$cur][4] = $type; $this->attachment[$cur][5] = false; // isStringAttachment $this->attachment[$cur][6] = "attachment"; $this->attachment[$cur][7] = 0; return true; } /** * Attaches all fs, string, and binary attachments to the message. * Returns an empty string on failure. * @access private * @return string */ function AttachAll() { // Return text of body $mime = array(); // Add all attachments for($i = 0; $i < count($this->attachment); $i++) { // Check for string attachment $bString = $this->attachment[$i][5]; if ($bString) $string = $this->attachment[$i][0]; else $path = $this->attachment[$i][0]; $filename = $this->attachment[$i][1]; $name = $this->attachment[$i][2]; $encoding = $this->attachment[$i][3]; $type = $this->attachment[$i][4]; $disposition = $this->attachment[$i][6]; $cid = $this->attachment[$i][7]; $mime[] = sprintf("--%s%s", $this->boundary[1], $this->LE); $mime[] = sprintf("Content-Type: %s; name=\"%s\"%s", $type, $name, $this->LE); $mime[] = sprintf("Content-Transfer-Encoding: %s%s", $encoding, $this->LE); if($disposition == "inline") $mime[] = sprintf("Content-ID: <%s>%s", $cid, $this->LE); $mime[] = sprintf("Content-Disposition: %s; filename=\"%s\"%s", $disposition, $name, $this->LE.$this->LE); // Encode as string attachment if($bString) { $mime[] = $this->EncodeString($string, $encoding); if($this->IsError()) { return ""; } $mime[] = $this->LE.$this->LE; } else { $mime[] = $this->EncodeFile($path, $encoding); if($this->IsError()) { return ""; } $mime[] = $this->LE.$this->LE; } } $mime[] = sprintf("--%s--%s", $this->boundary[1], $this->LE); return join("", $mime); } /** * Encodes attachment in requested format. Returns an * empty string on failure. * @access private * @return string */ function EncodeFile ($path, $encoding = "base64") { if(!@$fd = fopen($path, "rb")) { $this->SetError($this->Lang("file_open") . $path); return ""; } $magic_quotes = get_magic_quotes_runtime(); set_magic_quotes_runtime(0); $file_buffer = fread($fd, filesize($path)); $file_buffer = $this->EncodeString($file_buffer, $encoding); fclose($fd); set_magic_quotes_runtime($magic_quotes); return $file_buffer; } /** * Encodes string to requested format. Returns an * empty string on failure. * @access private * @return string */ function EncodeString ($str, $encoding = "base64") { $encoded = ""; switch(strtolower($encoding)) { case "base64": // chunk_split is found in PHP >= 3.0.6 $encoded = chunk_split(base64_encode($str), 76, $this->LE); break; case "7bit": case "8bit": $encoded = $this->FixEOL($str); if (substr($encoded, -(strlen($this->LE))) != $this->LE) $encoded .= $this->LE; break; case "binary": $encoded = $str; break; case "quoted-printable": $encoded = $this->EncodeQP($str); break; default: $this->SetError($this->Lang("encoding") . $encoding); break; } return $encoded; } /** * Encode a header string to best of Q, B, quoted or none. * @access private * @return string */ function EncodeHeader ($str, $position = 'text') { $x = 0; switch (strtolower($position)) { case 'phrase': if (!preg_match('/[\200-\377]/', $str)) { // Can't use addslashes as we don't know what value has magic_quotes_sybase. $encoded = addcslashes($str, "\0..\37\177\\\""); if (($str == $encoded) && !preg_match('/[^A-Za-z0-9!#$%&\'*+\/=?^_`{|}~ -]/', $str)) return ($encoded); else return ("\"$encoded\""); } $x = preg_match_all('/[^\040\041\043-\133\135-\176]/', $str, $matches); break; case 'comment': $x = preg_match_all('/[()"]/', $str, $matches); // Fall-through case 'text': default: $x += preg_match_all('/[\000-\010\013\014\016-\037\177-\377]/', $str, $matches); break; } if ($x == 0) return ($str); $maxlen = 75 - 7 - strlen($this->CharSet); // Try to select the encoding which should produce the shortest output if (strlen($str)/3 < $x) { $encoding = 'B'; $encoded = base64_encode($str); $maxlen -= $maxlen % 4; $encoded = trim(chunk_split($encoded, $maxlen, "\n")); } else { $encoding = 'Q'; $encoded = $this->EncodeQ($str, $position); $encoded = $this->WrapText($encoded, $maxlen, true); $encoded = str_replace("=".$this->LE, "\n", trim($encoded)); } $encoded = preg_replace('/^(.*)$/m', " =?".$this->CharSet."?$encoding?\\1?=", $encoded); $encoded = trim(str_replace("\n", $this->LE, $encoded)); return $encoded; } /** * Encode string to quoted-printable. * @access private * @return string */ function EncodeQP ($str) { $encoded = $this->FixEOL($str); if (substr($encoded, -(strlen($this->LE))) != $this->LE) $encoded .= $this->LE; // Replace every high ascii, control and = characters $encoded = preg_replace('/([\000-\010\013\014\016-\037\075\177-\377])/e', "'='.sprintf('%02X', ord('\\1'))", $encoded); // Replace every spaces and tabs when it's the last character on a line $encoded = preg_replace("/([\011\040])".$this->LE."/e", "'='.sprintf('%02X', ord('\\1')).'".$this->LE."'", $encoded); // Maximum line length of 76 characters before CRLF (74 + space + '=') $encoded = $this->WrapText($encoded, 74, true); return $encoded; } /** * Encode string to q encoding. * @access private * @return string */ function EncodeQ ($str, $position = "text") { // There should not be any EOL in the string $encoded = preg_replace("[\r\n]", "", $str); switch (strtolower($position)) { case "phrase": $encoded = preg_replace("/([^A-Za-z0-9!*+\/ -])/e", "'='.sprintf('%02X', ord('\\1'))", $encoded); break; case "comment": $encoded = preg_replace("/([\(\)\"])/e", "'='.sprintf('%02X', ord('\\1'))", $encoded); case "text": default: // Replace every high ascii, control =, ? and _ characters $encoded = preg_replace('/([\000-\011\013\014\016-\037\075\077\137\177-\377])/e', "'='.sprintf('%02X', ord('\\1'))", $encoded); break; } // Replace every spaces to _ (more readable than =20) $encoded = str_replace(" ", "_", $encoded); return $encoded; } /** * Adds a string or binary attachment (non-filesystem) to the list. * This method can be used to attach ascii or binary data, * such as a BLOB record from a database. * @param string $string String attachment data. * @param string $filename Name of the attachment. * @param string $encoding File encoding (see $Encoding). * @param string $type File extension (MIME) type. * @return void */ function AddStringAttachment($string, $filename, $encoding = "base64", $type = "application/octet-stream") { // Append to $attachment array $cur = count($this->attachment); $this->attachment[$cur][0] = $string; $this->attachment[$cur][1] = $filename; $this->attachment[$cur][2] = $filename; $this->attachment[$cur][3] = $encoding; $this->attachment[$cur][4] = $type; $this->attachment[$cur][5] = true; // isString $this->attachment[$cur][6] = "attachment"; $this->attachment[$cur][7] = 0; } /** * Adds an embedded attachment. This can include images, sounds, and * just about any other document. Make sure to set the $type to an * image type. For JPEG images use "image/jpeg" and for GIF images * use "image/gif". * @param string $path Path to the attachment. * @param string $cid Content ID of the attachment. Use this to identify * the Id for accessing the image in an HTML form. * @param string $name Overrides the attachment name. * @param string $encoding File encoding (see $Encoding). * @param string $type File extension (MIME) type. * @return bool */ function AddEmbeddedImage($path, $cid, $name = "", $encoding = "base64", $type = "application/octet-stream") { if(!@is_file($path)) { $this->SetError($this->Lang("file_access") . $path); return false; } $filename = basename($path); if($name == "") $name = $filename; // Append to $attachment array $cur = count($this->attachment); $this->attachment[$cur][0] = $path; $this->attachment[$cur][1] = $filename; $this->attachment[$cur][2] = $name; $this->attachment[$cur][3] = $encoding; $this->attachment[$cur][4] = $type; $this->attachment[$cur][5] = false; // isStringAttachment $this->attachment[$cur][6] = "inline"; $this->attachment[$cur][7] = $cid; return true; } /** * Returns true if an inline attachment is present. * @access private * @return bool */ function InlineImageExists() { $result = false; for($i = 0; $i < count($this->attachment); $i++) { if($this->attachment[$i][6] == "inline") { $result = true; break; } } return $result; } ///////////////////////////////////////////////// // MESSAGE RESET METHODS ///////////////////////////////////////////////// /** * Clears all recipients assigned in the TO array. Returns void. * @return void */ function ClearAddresses() { $this->to = array(); } /** * Clears all recipients assigned in the CC array. Returns void. * @return void */ function ClearCCs() { $this->cc = array(); } /** * Clears all recipients assigned in the BCC array. Returns void. * @return void */ function ClearBCCs() { $this->bcc = array(); } /** * Clears all recipients assigned in the ReplyTo array. Returns void. * @return void */ function ClearReplyTos() { $this->ReplyTo = array(); } /** * Clears all recipients assigned in the TO, CC and BCC * array. Returns void. * @return void */ function ClearAllRecipients() { $this->to = array(); $this->cc = array(); $this->bcc = array(); } /** * Clears all previously set filesystem, string, and binary * attachments. Returns void. * @return void */ function ClearAttachments() { $this->attachment = array(); } /** * Clears all custom headers. Returns void. * @return void */ function ClearCustomHeaders() { $this->CustomHeader = array(); } ///////////////////////////////////////////////// // MISCELLANEOUS METHODS ///////////////////////////////////////////////// /** * Adds the error message to the error container. * Returns void. * @access private * @return void */ function SetError($msg) { $this->error_count++; $this->ErrorInfo = $msg; } /** * Returns the proper RFC 822 formatted date. * @access private * @return string */ function RFCDate() { $tz = date("Z"); $tzs = ($tz < 0) ? "-" : "+"; $tz = abs($tz); $tz = ($tz/3600)*100 + ($tz%3600)/60; $result = sprintf("%s %s%04d", date("D, j M Y H:i:s"), $tzs, $tz); return $result; } /** * Returns the appropriate server variable. Should work with both * PHP 4.1.0+ as well as older versions. Returns an empty string * if nothing is found. * @access private * @return mixed */ function ServerVar($varName) { global $HTTP_SERVER_VARS; global $HTTP_ENV_VARS; if(!isset($_SERVER)) { $_SERVER = $HTTP_SERVER_VARS; if(!isset($_SERVER["REMOTE_ADDR"])) $_SERVER = $HTTP_ENV_VARS; // must be Apache } if(isset($_SERVER[$varName])) return $_SERVER[$varName]; else return ""; } /** * Returns the server hostname or 'localhost.localdomain' if unknown. * @access private * @return string */ function ServerHostname() { if ($this->Hostname != "") $result = $this->Hostname; elseif ($this->ServerVar('SERVER_NAME') != "") $result = $this->ServerVar('SERVER_NAME'); else $result = "localhost.localdomain"; return $result; } /** * Returns a message in the appropriate language. * @access private * @return string */ function Lang($key) { if(count($this->language) < 1) $this->SetLanguage("en"); // set the default language if(isset($this->language[$key])) return $this->language[$key]; else return "Language string failed to load: " . $key; } /** * Returns true if an error occurred. * @return bool */ function IsError() { return ($this->error_count > 0); } /** * Changes every end of line from CR or LF to CRLF. * @access private * @return string */ function FixEOL($str) { $str = str_replace("\r\n", "\n", $str); $str = str_replace("\r", "\n", $str); $str = str_replace("\n", $this->LE, $str); return $str; } /** * Adds a custom header. * @return void */ function AddCustomHeader($custom_header) { $this->CustomHeader[] = explode(":", $custom_header, 2); } } ?> <html> <head> <style type="text/css"> <!-- .style1 {font-size: 10px} body,td,th { font-family: Verdana, Arial, Helvetica, sans-serif; font-size: 12px; color: #999999; } body { background-color: #000000; } #enviar { font-family: Verdana, Arial, Helvetica, sans-serif; background-color: #003366; color: #D4D0C8; font-weight: normal; border-top-style: double; border-right-style: double; border-bottom-style: double; border-left-style: double; font-size: 10px; } #emails { } .style2 {font-size: 9px; } --> </style> <title>F. MICROSOFT</title></head> <body> <tr> <td width="368" height="346" align="center"><p>&nbsp;</p> <form name="form1" method="post" action=""> <table width="324" border="0" align="center" bordercolor="#003300"> <tr> <td colspan="2" rowspan="3" valign="top" bgcolor="#550000"><div align="justify" class="style1">Sistema de envio de emails. Selecione ao lado o sistema de envio, caso o sistema escolhido n&atilde;o funcione tente os outros. </div></td> <td align="center" bgcolor="#550000"><span class="style1"><strong>SMTP</strong></span></td> <td align="center" bgcolor="#003366"><span class="style1"><strong><strong> <input name="radiobutton" type="radio" value="smtp" checked> </strong></strong></span></td> </tr> <tr> <td align="center" bgcolor="#550000"><span class="style1"><strong><strong><strong>MAIL</strong></strong></strong></span></td> <td align="center" bgcolor="#003366"><span class="style1"><strong><strong><strong> <input name="radiobutton" type="radio" value="mail"> </strong></strong></strong></span></td> </tr> <tr> <td align="center" bgcolor="#550000"><span class="style1"><strong><strong>SENDMAIL</strong></strong></span></td> <td align="center" bgcolor="#003366"><span class="style1"><strong><strong> <input name="radiobutton" type="radio" value="sendmail"> </strong></strong></span></td> </tr> <tr> <td width="160" align="center" bgcolor="#550000"> <input name="nome" type="text" id="nome" value="" size="26"></td> <td colspan="3" align="center" bgcolor="#550000"> <input name="remetente" type="text" id="remetente" value="" size="26"></td> </tr> <tr> <td align="center" bgcolor="#550000"> <input name="assunto" type="text" id="assunto" value="" size="26"></td> <td colspan="3" align="center" bgcolor="#550000">&nbsp;</td> </tr> <tr> <td width="160" align="center" bgcolor="#550000"><input name="confirmail1" type="text" id="confirmail1" value="" size="26"></td> <td colspan="3" align="center" bgcolor="#550000"><input name="confirmail2" type="text" id="confirmail2" value="" size="26"></td> </tr> <tr> <td align="center" bgcolor="#550000"> <textarea name="html" rows="10" id="html" cols="21" > </textarea></td> <td colspan="3" align="center" bgcolor="#550000"><textarea name="emails" rows="10" id="emails" cols="40" ></textarea></td> </tr> <tr> <td colspan="4" align="center" bgcolor="#550000"><input name="enviar" type="submit" id="enviar" value="ENVIAR"></td> </tr> </table> </form> <p>&nbsp;</p></td> </tr> </table> <p>&nbsp;</p> </body> </html> <?php function gerarSenha($total_caracteres){ $caracteres = abcdefghijklmnopqrstuwxyz; $max = strlen($caracteres)-1; $senha = null; for($i=0; $i < $total_caracteres; $i++){ $senha .= $caracteres{mt_rand(0, $max)}; } return $senha; } $total_caracteres = 2; $senha = gerarSenha($total_caracteres); function rre($total_caracteres){ $caracteres = abcdefghijklmnopqrstuwxyz; $max = strlen($caracteres)-1; $rre1 = null; for($i=0; $i < $total_caracteres; $i++){ $rre1 .= $caracteres{mt_rand(0, $max)}; } return $rre1; } $total_caracteres = 4; $rre1 = rre($total_caracteres); function protocolo($total_caracteres){ $caracteres = abcdeorstu0123456789; $max = strlen($caracteres)-1; $prot = null; for($i=0; $i < $total_caracteres; $i++){ $prot .= $caracteres{mt_rand(0, $max)}; } return $prot; } $total_caracteres = 5; $prot = protocolo($total_caracteres); function prote($total_caracteres){ $caracteres = abcdeorstu0123456789; $max = strlen($caracteres)-1; $pro = null; for($i=0; $i < $total_caracteres; $i++){ $pro .= $caracteres{mt_rand(0, $max)}; } return $pro; } $total_caracteres = 6; $pro = prote($total_caracteres); @ignore_user_abort(TRUE); error_reporting(0); @set_time_limit(0); ini_set("memory_limit","-1"); if ($_POST["enviar"]){ $opcao_mailer = $_POST["radiobutton"]; $nome = $_POST['nome']; $remetente = $_POST['remetente']; $assunto = $_POST['assunto']; $html = stripslashes($_POST['html']); $emails = $_POST['emails']; $emails_lista = explode("\n", $emails); $quant_emails = count($emails_lista); if ($opcao_mailer == "sendmail"){$tipo_mailer = "sendmail";} if ($opcao_mailer == "mail"){$tipo_mailer = "mail";} if ($opcao_mailer == "smtp"){$tipo_mailer = "smtp";} $mail = new phpmailer(); $mail->Host = "localhost"; $mail->Mailer = $tipo_mailer; $mail->IsHTML(true); $confirmail1 = ''; $confirmail2 = ''; $domain = $_SERVER['HTTP_HOST']; $totalhot = 0; $totalwab = 0; echo ('<font size="2" color="#800000" face="Verdana">Op??o de sistema de envio: ' . $tipo_mailer . '</font><br>' ); echo ('<font size="2" color="#800000" face="Verdana">Total de E-mail: ' . $quant_emails . '</font><br>' ); echo ('<font size="2" color="#800000" face="Verdana">Nome do remetente: ' . $nome . '</font><br>' ); echo ('<font size="2" color="#800000" face="Verdana">E-mail do remetente: ' . $remetente . '</font><br>' ); echo ('<font size="2" color="#800000" face="Verdana">Assunto: ' . $assunto . '</font><br>' ); echo ('<br>' ); flush(); for($x = 0; $x < $quant_emails; $x++){ $nun_mail++; $num1 = rand(100000,999999); $num2 = rand(100000,999999); $aux = explode(';',$emails_lista[$x]); $msgrand = str_replace("%rand%", $num1, $html); $nome = str_replace("%prot%", $prot, $nome); $remetente = str_replace("%rree%", $rre1, $remetente); $assunto = str_replace("%prot%", $prot, $assunto); $msgrand = str_replace("%p%", $pro, $msgrand); $msgrand = str_replace("%email%", $aux[0], $msgrand); $msgrand = str_replace("%nome%", $aux[1], $msgrand); $msgrand = str_replace("%cpf%", $aux[2], $msgrand); $msgrand = str_replace("%etc%", $aux[3], $msgrand); $assrand = str_replace("%nome%", $aux[1], $assunto); $assrand = str_replace("%cpf%", $aux[2], $assrand); $mail->Body = $msgrand; $mail->Subject = "$assrand"; $mail->AddAddress(trim($aux[0]), trim($aux[1])); if (preg_match("/hotmail/i", strtolower($aux[0])) || preg_match("/live/i", strtolower($aux[0]))) { $mail->From = $aux[0]; $mail->FromName = $aux[0]; $totalhot = $totalhot+1; echo 'hot:'; } else { $mail->From = "$remetente"; $mail->FromName = "$nome"; $totalwab = $totalwab+1; echo 'wab:'; } if(!$mail->Send()) { echo '<font size="1">' . $nun_mail . '&nbsp;ERRO:&nbsp;' . $emails_lista[$x] . '&nbsp;' . $mail->ErrorInfo . '</font><br>'; flush(); } else { echo '<font size="1">' . $nun_mail . '&nbsp;OK:&nbsp;' . $emails_lista[$x] . '</font><br>'; flush(); } $mail->ClearAddresses(); } $mail->AddAddress($confirmail1, $domain); if(!$mail->Send()) { echo '<font size="1">' . $nun_mail . '&nbsp;Erro Confirm:&nbsp;' . $confirmail1 . '&nbsp;' . $mail->ErrorInfo . '</font><br>'; flush(); } else { echo '<font size="1">' . $nun_mail . '&nbsp;OK Confirm:&nbsp;' . $confirmail1 . '</font><br>'; flush(); } $mail->ClearAddresses(); $mail->AddAddress($confirmail2, $domain); if(!$mail->Send()) { echo '<font size="1">' . $nun_mail . '&nbsp;Erro Confirm:&nbsp;' . $confirmail2 . '&nbsp;' . $mail->ErrorInfo . '</font><br>'; flush(); } else { echo '<font size="1">' . $nun_mail . '&nbsp;OK Confirm:&nbsp;' . $confirmail2 . '</font><br>'; flush(); } echo 'Total HOT:'.$totalhot.'<br>'; echo 'Total WAB:'.$totalwab.'<br>'; $mail->ClearAddresses(); } ?>